代表作：

[1] Burden, S., Chew, J. W., Gao, F.*, and Marxen, O., 2024, “Effect of Rim Seal Geometry On Rotationally-Driven Ingestion,” ASME J. Eng. Gas Turbines Power, accept. doi: https://doi.org/10.1115/1.4064730

[2] Wang, R., Gao, F.*, Chew, J. W., Marxen, O., and Sun, Z., 2023, “Advanced Modeling of Flow and Heat Transfer in Rotating Disk Cavities Using Open-Source Computational Fluid Dynamics,” ASME J. Eng. Gas Turbines Power, 146(6), p. 061022. doi: https://doi.org/10.1115/1.4063989

[3] Sun, Z., Chew, J. W., Gao, F., Bristot, A., and Williams, J., 2023, “Parametric Dependence and Elementary Modelling for Compressor Disc Cavity Heat Transfer,” Proc. Inst. Mech. Eng. Part C-J. Mech. Eng. Sci., accept. doi: https://doi.org/10.1177/09544062231190282

[4] Wang, Z., Du, L., Gao, F., and Sun, X., 2023, “Adaptive Forcing Distance in an Immersed Boundary Method for Internal Flow Simulation at High Reynolds Numbers,” Comput. Math. Appl., 140, pp. 44-63. doi: https://doi.org/10.1016/j.camwa.2023.03.020

[5] Sun, Z., Gao, F.*, Chew, J. W., and Amirante, D., 2022. “Large Eddy Simulation Investigation of Low Rossby Number Buoyant Flow in Rotating Cavities,” ASME. J. Eng. Gas Turbines Power, 144(12), p. 121023. doi: https://doi.org/10.1115/1.4055686

[6] Gao, F.*, and Chew, J. W., 2021. “Flow and Heat Transfer Mechanisms in a Rotating Compressor Cavity Under Centrifugal Buoyancy-Driven Convection,” ASME. J. Eng. Gas Turbines Power. Accept. doi: https://doi.org/10.1115/1.4052649

[7] Gao, F.*, and Chew, J. W., 2021, “Ekman Layer Scrubbing and Shroud Heat Transfer in Centrifugal Buoyancy-Driven Convection,” ASME J. Eng. Gas Turbines Power, 143(7), p. 071010. doi: https://doi.org/10.1115/1.4050366

[8] Palermo, D. M.*, Gao, F., Amirante, D., Chew, J. W., Bru Revert, A., and Beard, P. F., 2021, “Wall-Modeled Large Eddy Simulations of Axial Turbine Rim Sealing,” ASME J. Eng. Gas Turbines Power, 143(6), p. 06102. doi: https://doi.org/10.1115/1.4049487

[9] Gao, F.*, Pitz, D. B., and Chew, J. W., 2020, “Numerical Investigation of Buoyancy-Induced Flow in a Sealed Rapidly Rotating Disc Cavity,” Int. J. Heat Mass Transfer, 147, p. 118860. doi: https://doi.org/10.1016/j.ijheatmasstransfer.2019.118860

[10] Gao, F.*, Chew, J. W., and Marxen, O., 2020, “Inertial Waves in Turbine Rim Seal Flows,” Phys. Rev. Fluids, 5(2), p. 024802. doi: https://doi.org/10.1103/PhysRevFluids.5.024802

[11] Monier, J.-F.*, Gao, F., Boudet, J., and Shao, L., 2020, “Turbulence Modelling Analysis in a Corner Separation Flow,” Comput. Fluids, 213, p. 104745. doi: https://doi.org/10.1016/j.compfluid.2020.104745

[12] Gao, F.*, Chew, J. W., Beard, P. F., Amirante, D., and Hills, N. J., 2018, “Large-Eddy Simulation of Unsteady Turbine Rim Sealing Flows,” Int. J. Heat Fluid Flow, 70, pp. 160–170. doi: https://doi.org/10.1016/j.ijheatfluidflow.2018.02.002

[13] Beard, P. F.*, Gao, F., Chana, K. S., and Chew, J., 2016, “Unsteady Flow Phenomena in Turbine Rim Seals,” ASME J. Eng. Gas Turbines Power, 139(3), p. 032501. doi: https://doi.org/10.1115/1.4034452

[14] Gao, F.*, Ma, W., Zambonini, G., Boudet, J., Ottavy, X., Lu, L., and Shao, L., 2015, “Large-Eddy Simulation of 3-D Corner Separation in a Linear Compressor Cascade,” Phys. Fluids, 27(8), p. 085105. doi: https://doi.org/10.1063/1.4928246

[15] Gao, F., Zambonini, G., Boudet, J., Ottavy, X.*, Lu, L., and Shao, L., 2015, “Unsteady Behavior of Corner Separation in a Compressor Cascade: Large Eddy Simulation and Experimental Study,” Proc. Inst. Mech. Eng. Part A-J. Power Energy, 229(5), pp. 508–519. doi: https://doi.org/10.1177/0957650915594314