获奖

1.    张大义(3/6), 航空涡扇发动机外部力学环境振动载荷谱编制方法及应用,中国航空工业集团公司，科技进步，二等奖，2014）

2.   张大义(1/1), 气流激励下的叶片高周疲劳概率寿命预估方法,北京市科协, 优秀科技论文, 一等奖, 2012

3.   在役航空涡扇发动机整机振动故障诊断与抑制关键技术研究及应用，四川省科技进步二等奖，201910

4.   北京航空航天大学科学技术一等奖，获奖项目：航空发动机结构完整性和可靠性技术基础研究

专利

1.       张大义,杨诚,曾振坤. 一种针对叶片丢失故障转子的刚度可修复支承结构. ZL 2021 1 1577604.9

2.       张大义,曾振坤,李继世,杨诚. 一种支承刚度非对称程度可调的立式转子试验器. ZL 2021 1 0331070.5

3.       张大义,徐浩,洪杰,马艳红. 一种负刚度机构及桌面手机存放装置. 国家发明专利, ZL 2019 1 0058428.4

4.       张大义,徐浩,马艳红,洪杰,于平超. 叶片-机匣在复杂接触状态下的碰摩力测试试验器. 国家发明专利, ZL201810970548.7

5.       张大义,夏颖,付俭伟,洪杰,马艳红. 一种叶片加载装置、槽间垫片加载装置与减振试验器, 2018.5.15, 中国, ZL201710070717.7.

6.       带缘板阻尼器结构涡轮叶片的减振试验装置

7.       洪杰,马艳红,陈璐璐,张大义,朱彬. 一种内置排骨架式气动阻尼的叶片, 2015.10.1, 中国,201010139234.6.

8.       马艳红,张大义,洪杰,陆宏伟,仝小龙.一种具有负泊松比特性的内空型金属橡胶隔振器,2012.10.10,中国,CN201210173041.1.

9.       马艳红,洪杰,王虹,张大义. 航空发动机转子系统用气膜密封阻尼结构设计方法及气膜密封阻尼结构,2011.8.17,中国,CN201110051661.3.

学术论文

[1]    洪杰,邓吟,张大义. 弹性环式挤压油膜阻尼器动力设计方法. 北京航空航天大学学报, 2006,V32(6):649-653 (EI).

[2]    张大义,陈璐璐,洪杰. 离心叶轮与轴流叶轮振动特性的对比分析. 战术导弹技术, 2006,(1):22-26.

[3]    张大义,母国新,洪杰,等. 航空发动机转子支承系统刚度计算中的几个问题. 战术导弹技术, 2005,(2):20-23.

[4]    张大义,史亚杰,洪杰,等. 带宽弦叶片的盘片耦合振动特性研究[J]. 北京航空航天大学学报,2004,30(9):808-812. (EI)

[5]    张大义,洪杰,林丹. 船用气水分离器静强度分析技术研究. 船舶工程, 2007, V29(6):9-12.

[6]       洪杰,张大义,高金海,等. 舰用气水分离器动力特性分析技术研究. 哈尔滨工程大学2007年全国博士生学术论坛, 哈尔滨: 2007.

[7]       Jie Hong, Dayi Zhang, Yajie Shi, and et al. Experimental study of damping characteristic of shrouded blade. Proceedings of the ASME Turbo Expo 2007 - Power for Land, Sea, and Air, 2007, V5:485-491, GT2007-27610 (EI).

[8]    Ma Yanhong, Hong Jie, Zhang Dayi, et al. Study of transient characteristic of a simple rigid rotor supported on a squeeze film damper with valvular metal rubber squeeze film ring. Proceedings of the ASME Turbo Expo 2007 - Power for Land, Sea, and Air, 2007, V5: 869-877, GT2007-27162. (EI).

[9]    洪杰,张大义,陈璐璐. 气流激励下的叶片高周疲劳寿命研究的发展[J]. 航空动力学报, 2009, v 24(3): 652-661, March 2009. (EI)

[10] 张大义,马艳红,洪杰,等. 气流激励下叶片振动响应分析方法, 航空动力学报, v 24, n 7, p 1523-1529, July 2009. (EI)

[11] 马艳红,张大义,洪杰,等. 气流激励下叶片的高周疲劳概率寿命预估技术. 推进技术, v 30, n 4, p 462-466, August 2009. (EI)

[12] 张大义,马艳红,梁智超,等. 整机结构设计的评估方法——结构效率. 航空动力学报, 25(10): 2070-2176, 2010. (EI)

[13] Liu Shuguo, Wang jun, Zhang Dayi, et al. Dynamics design of the aero-engine rotor joint structures based on experimental and numerical study. ASME Turbo Expo 2010, GT2010-23152, Glasgow, UK,June 14-18,2010 (EI)

[14] Zhang Dayi, Chen Meng, Hong Jie, et al. Study on Rubbing Failure between Fan Vanes and Spacer Ring of a Turbo-Fan Engine[R]. ASME-GT, GT2010-23152, 2010 (EI)

[15] 张大义, 洪杰, 梁智超. 航空发动机转子系统的结构效率评估方法研究. 第9届转子动力学年会，2010年8月，贵州

[16] Dayi Zhang, Jie Hong, Yanhong Ma and et al. A probability method for prediction on high cycle fatigue of blades arisen by aerodynamic loads. Advances in Engineering Software Journal, 2011(42):1059-1073. (SCI) (IF:1.22, 35/105, Q2)

[17] 张大义，洪杰，任德新. 碳陶双基体复合材料壳结构的振动分析. 航空动力学报, 26(5):818-822, 2011 (EI)

[18] 张大义，马艳红，洪杰，等. 双向顺序耦合法求解动力响应的试验研究. 航空动力学报,2011.5 (EI)

[19] Liu Shuguo,Ma Yanhong*,Zhang Dayi,Hong Jie. Studies on dynamic characteristics of the joint in the aero-engine rotor system. Mechanical Systems and Signal Processing.2012,v29:120–136. (SCI) (Q1, 1.913,16/125)

[20] 朱彬, 马艳红*, 张大义,等. 金属橡胶迟滞特性本构模型研究.物理学报, 2012,V61,7: 78101-078101. (SCI) (Q2, 1.106, 11/34)

[21] 洪杰，刘宝龙，张大义*，马艳红. 具有形状记忆效应的新型智能阻尼材料及其热弹性力学性能研究[J]. 物理学报, 2012,61(16):168102 (SCI) (Q2, 1.106, 11/34)

[22] Dayi Zhang, Yanhong Ma, Jie Hong. Dynamical Sensitivity Analysis on Blades in Turbine Machines. Applied Mechanics and Materials Vols. 226-228 (2012) pp 602-606, doi:10.4028/www.scientific.net/AMM.226-228.602. (EI)

[23] Hong J，Liu B，Zhang D，Ma Y. Shape memory effect and hysteresis behavior of Shape Memory Alloy Metal Rubber，Proceeding of ASME Turbo Expo 2012: GT2012-69244, Copenhagen, Denmark，2012.6.11-2012.6.15 (EI)

[24] Li J，Hong J，Ma Y，Zhang D，Modelling of misaligned rotor systems in aero-engines，Proceedings of the ASME 2012 International Mechanical Engineering Congress & Exposition: IMECE2012-85706, Houston, Texas, USA，2012.11.9- 2012.11.15 (EI)

[25] Yang Xin, Jie Hong, Yan Hong Ma, and Da Yi Zhang. Active Vibration Control of a Double-Decker Cantilever Beam Using Shape Memory Alloy. In Applied Mechanics and Materials, vol. 226, pp. 252-256. Trans Tech Publications, 2012. (EI)

[26] 洪杰, 刘书国, 张大义, and 陈萌. 小型短寿命涡扇发动机涡轮叶片疲劳失效分析. 航空动力学报 27, no. 3 (2012): 604-609. (EI)

[27] 洪杰, 杨鑫, 陈璐璐, 张大义. 基于接触状态分析的叶冠阻尼评估与改进设计. 北京航空航天大学学报. 2012;5:022. (EI)

[28] 洪杰, 杨鑫, 陈璐璐, 张大义. 叶冠涂层材料接触刚度和微动磨损实验. 北京航空航天大学学报. 2012;38(10):1280-4. (EI)

[29] 彭刚, 徐雷, 张大义. 某涡扇发动机中介机匣振动特性分析.第五届中国航空学会青年科技论坛,2012,8: 256-261.

[30] Zhang D, Scarpa F*, Ma Y, Boba K, et al. Compression mechanics of nickel-based superalloy metal rubber. Materials Sence & Engineering A, 2013, 580:305-312. (SCI, Q1)

[31] Zhang D, Liu S, Liu B, Hong J*. Investigation on bending fatigue failure of a micro-gear through finite element analysis. Engineering Failure Analysis, 2013, 31:225-235. (SCI, Q2)

[32] Ma Y, Liang Z, Wang H, Zhang D*, et al. Theoretical and experimental steady-state rotordynamics of an adaptive Air Film Damper with Metal Rubber. Journal of Sound and Vibration, 2013,332:5710-5726. (SCI,Q1)

[33] Ma Y, Zhu H, Zhang D*, et al. Experimental investigation on shape memory alloy metal rubber. Science China Technological Sciences, 2013, 56(8): 1949-1955. (SCI, Q2)

[34] 马艳红, 仝小龙, 朱彬, 张大义*, 洪杰. 金属橡胶热物理性能理论与试验研究. 物理学报. 2013(4):462-71. (SCI, Q3)

[35] Ma Y, Scarpa F*, Zhang D, et al. A nonlinear auxetic structural vibration damper with metal rubber particles. Smart Materials and Structures, 2013, 22(8), 084012. (SCI, Q1)

[36] Liu, Bao Long, Jie Hong, Da Yi Zhang, and Yan Hong Ma. Fatigue Failure Analysis of a Minitype Straight Bevel Driven Gear. In Advanced Materials Research, vol. 622, pp. 605-610. Trans Tech Publications, 2013. (EI)

[37] Ma Y, Zhu H, Zhang D, Hong J. Experimental investigation on dynamic mechanical behavior of the elastic ring support with metal rubber. InASME 2013 International Mechanical Engineering Congress and Exposition 2013 Nov 15 (pp. V04BT04A053-V04BT04A053). American Society of Mechanical Engineers. (EI)

[38] Wu F, Liang Z, Ma Y, Zhang D. Bending stiffness and dynamic characteristics of a rotor with spline joints. InASME 2013 International Mechanical Engineering Congress and Exposition 2013 Nov 15 (pp. V04AT04A058-V04AT04A058). American Society of Mechanical Engineers. (EI)

[39] 张大义, 洪杰, 马艳红, 梁智超. 高结构效率的斜流压气机结构设计. 航空动力学报. 2013(4):866-871. (EI)

[40] 王桂华, 刘海年, 张大义, 洪杰. 航空发动机成附件振动环境试验剖面确定方法研究. 推进技术. 2013 Sep 11;34(8):1101-7. (EI)

[41] 马艳红, 陈璐璐, 张大义, 洪杰. 航空发动机转子系统结构效率评估参数及计算方法. 航空动力学报. 2013(7):1598-606. (EI)

[42] 刘宝龙, 马艳红, 张大义, 洪杰. 金属橡胶力学特性的热处理工艺影响. 北京航空航天大学学报. 2013(2):259-63. (EI)

[43] 刘海年, 刘志强, 张大义, 王桂华, 洪杰. 航空发动机成品振动环境分析与试验载荷谱确定. 航空维修与工程. 2013(4):63-5.

[44] Dayi Zhang, Fabrizio Scarpa, Yanhong Ma, Jie Hong, Yusuf Mahadik. Dynamic mechanical behavior of nickel-based superalloy metal rubber. Materials and Design 56 (2014) 69–77. (SCI, Q1)

[45] Ma Y, Zhang Q, Zhang D*, Scarpa F, et al. A novel smart rotor support with shape memory alloy metal rubber for high temperatures and variable amplitude vibrations. Smart Materials and Structures, 2014, 23(12). (SCI) (IF: 2.377，Q1)

[46] Zhang Dayi, Ma Yanhong∗, Hong Jie and Chen Lulu. Failure Analysis of Turbine Blades in a Small Turbofan Engine through Dynamical Study. Journal of vibration engineering and technologies, 2014, 2(2): 127-139. (SCI) (Q4)

[47] J. Hong, Q.C. Zhang, Y.H. Ma, B.L. Liu, F. Scarpa, D.Y. Zhang*. Tuning the Vibration of a Rotor with Shape Memory Alloy Metal Rubber Supports. 9th IFToMM International Conference on Rotor Dynamics IFToMM ICORD 2014, Milano, Italia, September, 22-25, 2014. 

[48] Hong, J., Shaposhnikov, K., Zhang, D*. and Ma, Y., 2015. Theoretical modeling for a rotor-bearing-foundation system and its dynamic characteristics analysis. In Proceedings of the 9th IFToMM International Conference on Rotor Dynamics (pp. 2199-2214). Springer International Publishing. (EI) 

[49] Yanhong Ma, Wang Cun, Dayi Zhang*, Jie Hong. Experimental Study on the Dynamic Characteristics of Joints in Rotor System. 9th IFToMM International Conference on Rotor Dynamics IFToMM ICORD 2014, Milano, Italia, September, 22-25, 2014. (EI) 

[50] Wang, C.*, Zhang, D., Zhu, X. and Hong, J., 2014, June. Study on the stiffness loss and the dynamic influence on rotor system of the bolted flange joint. In ASME Turbo Expo 2014: Turbine Technical Conference and Exposition (pp. V07AT31A020-V07AT31A020). American Society of Mechanical Engineers. (EI)

[51] 马艳红*, 何天元, 张大义, 洪杰. 支承刚度非线性转子系统的不平衡响应. 航空动力学报. 2014;29(7):1527-34. (EI)

[52] 张蓟欣*, 徐雷, 张大义, 洪杰. 基于积叠线设计的弯掠叶片静强度优化方法. 推进技术. 2014(4):544-51. (EI) 

[53] 张清, 郝勇, 张大义, 刘宝龙, 洪杰. 大涵道比涡扇发动机低压涡轮间隙分析与设计. 航空发动机. 2014;40(2):56-60.

[54] 张大义,刘烨辉,洪 杰,马艳红. 航空发动机反转双转子系统临界转速求解方法[C]. 第11 届全国转子动力学学术讨论会, 大连, 2014, 8月15日-17日.

[55] 马艳红，王婵，张大义，洪杰    基于MR新型结构振动主动控制数值仿真研究[C]. 中国航空学会动力分会第八届动力年会  2014，9，辽宁沈阳

[56] 洪杰，文敏，张大义，马艳红    某带凸肩风扇叶片振动特性试验研究[C] 中国航空学会动力分会第八届动力年会

[57] 岳伟, 梅庆, 张大义, 洪杰. 高速转子止口连接结构稳定性设计方法. 第 11 届全国转子动力学学术讨论会 (ROTDYN2014) 论文集 (下册). 2014.

[58] 马艳红，何龙江，张大义，洪杰       结构参数对带凸肩风扇静力学特性的影响分析[C]     北航学术论坛    2014，10，北京.

[59] Ma Y, Zhang Q, Zhang D*, Scarpa F, et al. The mechanics of shape memory alloy metal rubber. Acta Materialia, 2015, 89-100. (SCI, Q1)

[60] Ma Y, Zhang Q, Zhang D*, Scarpa F, et al. Tuning the vibration of a rotor with shape memory alloy metal rubber supports. Journal of Sound and Vibration, 2015, 351:1-16. (SCI, Q1)

[61] Jie Hong, Wenzhong Yan, Yanhong Ma*, Dayi Zhang and Xin Yang. Experimental investigation on the vibration tuning of a shell with a shape memory alloy ring. Smart Materials and Structures, 2015, 24:105007. (SCI, Q1)

[62] Ma Y, Gao D, Zhang D*, et al. Compressive and dissipative behavior of metal rubber under constraints. Physica Status Solidi (b), 2015. DOI 10.1002/pssb.201451617. (SCI,Q3)

[63] Hong, J., Xu, M., Zhang, D*. and Liang, Z.. Safety design method of fan rotor system in aeroengine due to extreme loadings. In Reliability Systems Engineering (ICRSE), 2015 First International Conference on (pp. 1-6). IEEE.(EI)

[64] Ma Y, Wang M, Yang X, Zhang D*, Hong J. Experimental investigation on the vibration tuning of a beam with shape memory alloy. InASME Turbo Expo 2015: Turbine Technical Conference and Exposition 2015 Jun 15 (pp. V07BT33A001-V07BT33A001). American Society of Mechanical Engineers. (EI)

[65] Ma Y, Liang Z, Zhang D*, Yan W, Hong J. Experimental Investigation on Dynamical Response of an Overhung Rotor due to Sudden Unbalance. InASME Turbo Expo 2015: Turbine Technical Conference and Exposition 2015 Jun 15 (pp. V07BT32A009-V07BT32A009). American Society of Mechanical Engineers. (EI)

[66] Wang C, Ma Y, Zhang D*, Hong J. Interval Analysis on Aero-Engine Rotor System With Misalignment. InASME Turbo Expo 2015: Turbine Technical Conference and Exposition 2015 Jun 15 (pp. V07AT30A002-V07AT30A002). American Society of Mechanical Engineers. (EI)

[67] Ma YH, Cao C, Zhang DY*, Liang Z, Hong J. Constraint mechanical model and investigation for rub-impact in aero-engine system. InASME Turbo Expo 2015 Jun 15. (EI)

[68] 洪杰, 文敏, 马艳红*, 张大义. 凸肩径向位置对风扇叶片振动特性的影响. 航空动力学报. 2015;30(12):2817-23. (EI) （通讯已查对）

[69] 张大义*,刘烨辉,梁智超,马艳红,洪杰. 航空发动机双转子系统临界转速求解方法[J]. 推进技术, 2015,36(2):292-298. (EI)

[70] 张大义*, 刘烨辉, 洪杰, 马艳红. 航空发动机整机动力学模型建立与振动特性分析. 推进技术, 2015, 36(5), 768-773. (EI)

[71] 杨鑫,洪杰*,马艳红,张大义. SMA智能梁结构振动控制试验研究[J]. 航空学报,2015,36(5):768-773. (EI)

[72] 任德新,张大义*,何易峰,陈璐璐,洪杰.带颗粒型金属橡胶夹层阻尼结构的振动响应研究[J]. 推进技术, 2015,36(1):124-129. (EI)

[73] 陈璐璐, 张大义*, 文敏, 洪杰. 带凸肩风扇叶片振动特性及设计方法研究. 推进技术, 2015, 36(9):1389-1394. (EI)

[74] 马艳红, 何龙江, 张大义*,等. 结构参数对带凸肩风扇静力学特性的影响分析[J]. 推进技术, 2015, 36(8):1222-1228. (EI)

[75] 康力, 洪杰, 徐雷, 赵凯, 张大义. 航空发动机外部管路的振动响应分析.航空发动机 41, no. 2 (2015): 50-54

[76] 刘鑫，马艳红，张大义. 基于BP神经网络的金属橡胶回弹率预测.北京航空航天大学第十二届研究生学术论坛,2015,5，北京

[77] 廖鑫,张大义,洪杰,马艳红. 基于接触状态的转子止口连接结构设计[C]. 第十一届全国振动理论及应用学术会议.2015

[78] Wang C, Zhang D*, Ma Y, et al. Theoretical and experimental investigation on the sudden unbalance and rub-impact in rotor system caused by blade off. Mechanical Systems and Signal Processing. 2016 Aug 31;76:111-35. (SCI, Q1)

[79] Ma Y, Hu W, Zhang D*, Zhang Q, Hong J. Tunable mechanical characteristics of a novel soft magnetic entangled metallic wire material. Smart Materials and Structures. 2016 Aug 8;25(9):095015. (SCI, Q1)

[80] Hong J, Yu P, Zhang D*, Liang Z, Zhang Q. Dynamic Characteristics of Rotor System With Additional Constraint due to Rub-Impact. InASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition 2016 Jun 13 (pp. V07AT30A006-V07AT30A006). American Society of Mechanical Engineers. (EI)

[81] 马艳红, 梁智超, 王桂华,张大义*,洪杰. 航空发动机叶片丢失问题研究综述[J]. 航空动力学报, 2016, 31(3):513-526.

[82] 张大义, 何易峰, 陈璐璐,马艳红*，等. 带气膜阻尼结构振动特性的理论研究[J]. 航空动力学报, 2016, 31(2):282-288. (EI)（通讯已核实）

[83] 马艳红, 张启成, 张大义*, 朱海雄, 陆宏伟, 洪杰. 静载荷作用下金属橡胶失效判据及耐久性试验. 北京航空航天大学学报. 2016(2):227-35. (EI)（通讯已核实）

[84] 马艳红*, 曹冲, 张大义, 张蓟欣, 洪杰. 高负荷弯掠叶片力学模型与应力抑制研究. 推进技术. 2016;37(8):1551-9. (EI)

[85] 颜文忠*, Konstantin Shaposhnikov, 张大义,等. 基础振动对转子系统动力特性影响的试验研究[J]. 推进技术, 2016, 37(11). (EI)

[86] 于平超*，马艳红，张大义,等. 具有局部非线性刚度的复杂转子系统动力学模型及振动特性分析[J]. 推进技术, 2016, 37(12):2343-2351.

[87] Cun Wang, Dayi Zhang*, Yanhong Ma, et al. Dynamic behavior of aero-engine rotor with fusing design suffering blade off. Chinese Journal of Aeronautics. 2017, 30(3):918-931.  (SCI, Q1)

[88] Ma Y, Zhang Q, Zhang D*, Scarpa F, Gao D, Hong J. Size-dependent mechanical behavior and boundary layer effects in entangled metallic wire material systems. Journal of Materials Science, 2017, 52(7): 3741-3756. (SCI, Q1)

[89] Zhang D*, Fu J, Zhang Q, Hong J. An effective numerical method for calculating nonlinear dynamics of structures with dry friction: application to predict the vibration response of blades with underplatform dampers. Nonlinear Dynamics, 2017, 88:223-237. (SCI, Q1)

[90] Yanhong Ma, Qicheng Zhang, Dayi Zhang*, et al. Experimental investigation on the dynamic mechanical properties of soft magnetic entangled metallic wire material. Smart Mater. Struct., 2017,26, 055019 (SCI, Q1)

[91] Dayi Zhang, Ying Xia, Fabrizio Scarpa, Jie Hong*,et al. Interfacial contact stiffness of fractal rough surfaces. Scientific reports, 2017,7:12874. (SCI, Q1)

[92] Jie Hong, Xueqing He, Dayi Zhang*, Yanhong Ma. Vibration isolation design for periodical stiffened shells by the wave finite element method[C], Proceedings of the ASME 2017 International Mechanical Engineering Congress and Exposition, IMECE2017-70029, November 3-9, 2017, Tampa, Florida, USA.(EI)

[93] Yongquan Liu, Fayong Wu, Deyou Wang, Jie Hong. Robust design method to depress the rotor’s vibration for aircraft turbofan engines[C]. 23rd International Symposium on Air Breathing Engines will be settled at the Manchester Conference Centre in Manchester, UK. ISABE-2017-22692.

[94] 刘继兴,张大义,王存,洪杰. 带冠涡轮叶片振动特性的子区间组合分析方法[J]. 推进技术, 2017, v38(10): 2323-2330.（EI）

[95] 彭刚, 朱彬, 张大义*,等. 高涵道比涡扇发动机结构与力学性能定量评估[J]. 航空动力学报, 2017, 32(7):1728-1735.

[96] 岳伟*, 梅庆, 张大义,等. 高速可拆卸转子止口连接结构稳健性设计方法[J]. 航空动力学报, 2017, 32(7):1754-1761.

[97] 罗玛, 张大义, 朱海雄,等. 基于试验数据识别的金属橡胶有限元仿真方法[J]. 航空发动机, 2017, 43(3):56-61.

[98] Yu P, Zhang D, Ma Y*, et al. Dynamic modeling and vibration characteristics analysis of the aero-engine dual-rotor system with Fan blade out[J]. Mechanical Systems & Signal Processing, 2018, 106:158–175. (SCI, Q1)

[99] Jie HONG, Pingchao YU, Dayi ZHANG*, Zhichao LIANG. Modal characteristics analysis for a flexible rotor with non-smooth constraint due to intermittent rub-impact. Chinese Journal of Aeronautics, 2018, 31(3).  (SCI, Q1)

[100]         Jie Hong, Xueqing He, Dayi Zhang*, et al. Vibration isolation design for periodically stiffened shells by the wave finite element method. Journal of Sound and Vibration, 2018,419, 90-102. (SCI, Q1)

[101]         Qicheng Zhang , Dayi Zhang , Yousef Dobah , et al. Tensegrity cell mechanical metamaterial with metal rubber[J]. Applied Physics Letters, 2018, 113(3):031906-.(SCIE, Q1)

[102]         Ma Y, Zhang Q , Dobah Y , Scarpa F , Fraternali F , Skelton R, Zhang D, Hong J. Meta-tensegrity: design of a tensegrity prism with metal rubber. Composite Structures, 2018, 206, 644-657. (SCIE, Q1)

[103]         Zhang W, Neville R, Zhang D, et al. The two-dimensional elasticity of a chiral hinge lattice metamaterial[J]. International Journal of Solids & Structures, 2018. 10.1016/j.ijsolstr.2018.02.027. (SCIE, Q1)

[104]         Jie Hong, Pingchao Yu, Dayi Zhang*, et al. Investigation on the modal characteristics of the rubbing rotor system with additional constraint. ASME GT2018-75933.

[105]         Jie Hong, Tianrang Li, Zhichao Liang, Dayi Zhang*, et al. Safety Design Methods for Rotor-bearing System and Dynamic Analysis in Aero-engines, ASME GT2018-76065.（EI系统里没有通讯作者）

[106]         Konstantin Shaposhnikov*, Dayi Zhang, Wenzhong Yan, et al. Investigation on the Dynamic Characteristics of a Rotor Suffering Impact Foundation External Excitation[C]. IFToMM 2018, MMS 61, pp. 442–459, 2019. https://doi.org/10.1007/978-3-319-99268-6_31.

[107]         张大义,夏颖,张启成,等.金属橡胶力学性能研究进展与展望[J].航空动力学报, 2018, 33(6): 1432-1445. (EI)

[108]         刘继兴, 张大义*, 郑华强,等. 不同推力级高涵道比涡扇发动机结构与力学特征定量评估[J]. 推进技术, 2018, 39(5).(EI)

[109]         金海,刘继兴,张大义*等. 连接界面变形对转子动力特性影响的力学模型[J]. 北京航空航天大学学报, 2018, 44(6):1294-1302.(EI)

[110]         张大义, 张嵩, 付俭伟. 转子叶片缘板阻尼结构设计方法[J]. 航空动力学报, 2018, 33(4):961-968. (EI)

[111]         Zhang D. Vibration control for the typical structures in turbo engines. 3^rd international conference on microstructure and property of materials, Hangzhou, China, May 25-29, 2018. (国际会议大会特邀报告)

[112]         张大义,夏颖,付俭伟,洪杰,马艳红. 一种叶片加载装置、槽间垫片加载装置与减振试验器, 2018.5.15, 中国, ZL201710070717.7.

[113]         J Hong J, Yu P, Zhang D* , et al. Nonlinear dynamic analysis using the complex nonlinear modes for a rotor system with an additional constraint due to rub-impact[J]. Mechanical Systems and Signal Processing, 2019, 116:443-461. (SCIE, Q1)

[114]         Dayi Zhang, Bin Gao, Jie Hong*, et al. Experimental Investigation on the Dynamic Response of Flat Blades with Underplatform Dampers [J]. Chinese Journal of Aeronautics. 2019, 32(12): 2667-2678. (SCIE, Q1)

[115]         Mohammad M Kashani, Ehsan Ahmadi, Alicia Gonzalez-Buelga, Dayi Zhang, Fabrizio Scarpa. Layered Composite Entangled Wire Materials Blocks as Pre-Tensioned Vertebral Rocking Columns. Composite Structures. 2019, 214(15):153-163. (SCIE, Q1)

[116]         Junfei Tai, Tian He, Qiang Pan, Dayi Zhang*, Xiaoran Wang. A Fast Beamforming Method to Localize an Acoustic Emission Source under Unknown Wave Speed. Materials, 2019, 12, 735 doi:10.3390/ma12050735. (SCIE, Q3)

[117]         Jie Hong, Tianrang Li, Zhichao Liang, Dayi Zhang, and Yanhong Ma*. Research on Blade-Casing Rub-Impact Mechanism by Experiment and Simulation in Aeroengines. Shock and Vibration, vol. 2019, Article ID 3237960, 15 pages, 2019. (SCIE, Q3)

[118]         张大义, 杨诚, 林丹, 等. 槽间垫片功用分析及减振机理试验[J]. 航空动力学报, 2019, 34(6):1185-1192.

[119]         张大义, 杨诚, 夏颖, 等. 带缘板阻尼结构转子叶片振动特性的影响参数分析[J]. 振动与冲击, 2019, 38(10):226-232. (EI)

[120]         李继世, 张大义*, 王立,等.考虑流体介质影响的管路模态特性分析[J]. 航空动力学报, 2019(3):671-677. (EI)

[121]         Bin Gao, Jingxuan Zhang, Dayi Zhang*, Yifei Dou. Critical speed analysis and resonance margin promoting for one helium turbine rotor[C]. 14th International Conference on Vibration Problems, Crete, Greece, September 1-4, 2019,No. 18369.

[122]         Cheng Yang, Dayi Zhang*, Yifei Dou, Jie Hong. Stiffness modeling for the curvic coupling considering contact details[C]. 14th International Conference on Vibration Problems, Crete, Greece, September 1-4, 2019,No. 18372.

[123]         章健, 张大义, 王永锋, 等. 共用支承-转子结构系统振动耦合特性分析[J]. 北京航空航天大学学报, 2019, 045(009):1902-1910.

[124]         葛翔赟,林丹,张大义. 铰接连接结构动态响应与强度计算方法[J]. 机械设计与制造.2019, S1, 37-42.

[125]         朱彬, 杨诚, 刘烨辉, 张大义. 套齿连接结构力学模型及其刚度影响因素[J]. 机械设计与制造, 2019, 000(0z1):86-90,94.

[126]         Heng LIU, Jie HONG, Dayi ZHANG*. Study on Bending and Vibration Behaviors of a Discontinuous Beam with a Curvic Coupling under Different Axial Forces. Frontiers of Mechanical Engineering [J]. (SCI, Q2)

[127]         Jie Hong, Pingchao Yua, Yanhong Ma*, Dayi Zhang, Investigation on nonlinear lateral-torsional coupled vibration of a rotor system with substantial unbalance. Chinese Journal of Aeronautics, doi://doi.org/10.1016/j.cja.2020.02.023. (SCI, Q1)

[128]         李继世,张大义,黄爱萍,等. 航空发动机外部附件振动试验载荷谱编制[J]. 中国航空学会动力分会第 20 届发动机结构强度振动学术交流会 辽宁沈阳, 2020.10

[129]         Dayi Zhang, Cheng Yang, Tian He*, et al. Modelling and stress analysis for double-row curvic couplings[J]. Proc IMechE Part C: J Mechanical Engineering Science. DOI: 10.1177/0954406220974051

[130]         曾振坤,张大义,黄巍,等.径向支承刚度非对称转子系统振动特性分析[J].推进技术, 2021. doi://doi. org/10.13675/j.cnki.tjjs.200559.

[131]         李继世,张大义,黄爱萍,等.航空发动机外部附件振动试验载荷谱编制[J].航空发动机, 2021,47(03),53-59.

[132]         Z. Zeng, D Zhang,* R Tong, Experimental investigation and analytical modeling for blade-casing rubbing force. [J]. Mechanical Systems and Signal Processing, https://doi.org/10.1016/j.ymssp.2021

[133]         张大义,莫远哲,范雨,等.兼顾理论与实践的机械振动基础课程教学模式探[J].高教学刊, 2021.5:96-99(双一流中文核心)

[134]         林京,张博瑶,张大义,等.航空燃气涡轮发动机故障诊断研究现状与展望[J].航空学报.

[135]         L. Chen, Z. Zeng, D. Zhang*, et al. Vibration Properties of Dual-Rotor Systems under Base Excitation, Mass Unbalance and Gravity[J]. Applied sciences, 2022, doi.org/10.3390/app12030960.

[136]         D. Liu, L. Zhou, D. Zhang*, et al. Modeling and dynamic analysis for rotors with curvic-coupling looseness[J]. Journal of Vibration and Control, 2022, DOI: 10.1177/10775463221074481

[137]         D. Liu, L. Zhou, D. Zhang*, et al. A strategy of vibration control for rotors with dry friction dampers[J]. Journal of Vibration and Control, 2022, DOI: 10.1177/10775463221093105.

[138]         Yonghao Miao, Boyao Zhang, Chenhui Li, Jing Lin and Dayi Zhang. Feature Mode Decomposition: New Decomposition Theory for Rotating Machinery Fault Diagnosis[J]. IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2022.

[139]         Fabrizio Scarpa, Wenjiao Zhang, Robin Neville, Dayi Zhang. Controlling failure with fractal chiral metamaterials[C]. TMS 2022 Annual Meeting & Exhibition, Anaheim, California, USA, February 27–March 3, 2022.

[140]         周良,张大义*,何田,王虹.双转子发动机不平衡量识别的自适应衰减AKF方法[C]. 中国太原2022.8.12-14.

[141]         曾振坤,张大义*,范雨,张辉,陈璐璐.碰摩引发的增压级转静耦合振动特性分析方法[J].航空动力学报,2022,37(10):2233-2241.DOI:10.13224/j.cnki.jasp.20220281.

[142]         张大义,莫远哲,范雨.工程实践牵引的机械振动教学案例设计[J].装备制造技术,2022(06):174-177.

[143]         Zhang Qicheng, Scarpa Fabrizio, Barton David, Zhu Yunpeng, Lang ZiQiang, Zhang Dayi, Peng HuaXin. Impact properties of uniaxially thermoformed auxetic foams[J]. International Journal of Impact Engineering, 2022, 163:104176-.

[144]         Zhang, QC ; Yu, XD; Scarpa, F; Barton, D; Zhu, YP; Lang, ZQ; Zhang, DY. A dynamic poroelastic model for auxetic polyurethane foams involving viscoelasticity and pneumatic damping effects in the linear regime[J]. Mechanical Systems and Signal Processing, 2 022, 179: 109375.

[145]         黄行蓉,孙赫,吴坚,范兴超,沈庆阳,张大义*.某涡扇发动机涡轮叶片动测应变模态频移现象分析[J].航空动力学报:1-11[2022-10-21].DOI:10.13224/j.cnki.jasp.20220189.

[146]         Zeng ZK, Zhang DY, He T, et al. Experimental investigation for the dynamic mechanical properties of a vertical anisotropically supported rotor. Mechanical Systems and Signal Processing, 2023, doi.org/10.1016/j.ymssp.2022.109678

[147]         孙业凯,吴亚光,王兴,范雨,袁杰,张大义.叶片/叶盘摩擦阻尼结构的非线性模态分析综述[J].航空动力学报,2022,37(10):2167-2187.DOI:10.13224/j.cnki.jasp.20220264.

[148]         黄行蓉,姚毅,张大义.适用于优化建筑结构声振特性的多重模态减缩策略[J/OL].振动工程学报:1-9[2023-01-31].http://kns.cnki.net/kcms/detail/32.1349.TB.20220427.1808.004.html.