Personal Information

Professor
Supervisor of Doctorate Candidates
Supervisor of Master's Candidates

Paper

.B Liu, X Sun, H Wang, Q Yuan, M Tian, D Chu, Y Geng, Polarization smoothing based on full Poincaré beams modulated by stress-engineered optics, Optics Express 2024 32 (7), 11491-11508
.Jiawei Liang, Dongbo Wu, Shibo Liu, Hui Wang, Jie Yu, Research on hybrid remanufacturing process chain of laser cladding, CNC machining and ultrasonic rolling for aero-engine blades, Journal of Manufacturing Processes, 2024, 110(31):331-349
.Dongbo Wu, Hui Wang, Jiawei Liang, Suet To, Adaptive acquisition and recognition system of blade surface defects during machining process, Measurement, 2024, 225:114008
.Tingfen Cao, Bowu Liu*, Hui Wang, et al, Research on peripheral clamping of large-aperture laser transport mirror, Optica Applicata, 53(2), 2023.
.Dongya Chu, Hui Wang, Honghong Wu, Bowu Liu, and Menjiya Tian, Divergent beam-based method for measuring the detuning angles of a laser frequency converter, Applied Optics Vol. 62, Issue 25, pp. 6787-6793 (2023)
.Lu, Ligang; Li, Pengfei; dongbo, wu; Liang, Jiawei; Wang, Hui; He, Pengpeng, Research on Assembly Accuracy of Deployable Arm based on Jacobian-Torsor Model, Robotic Intelligence and Automation Vol. 43 No. 3, pp. 225-234.
.Dongbo Wu, Hongru Lv, Hui Wang , Jie Yu, Adaptive CNC machining process optimization of near-net-shaped blade based on machining error data flow control, The International Journal of Advanced Manufacturing Technology, 2023, 124 :3257–3273
.Dongbo Wu, Zesheng Wang, Jiawei Liang, Hui Wang, Kung Zhang, Jie Yu, Clamping Error Calibration Algorithm of AeroEngine Blade Surface Polishing, International Journal of Precision Engineering and Manufacturing, 24, pages1147–1159 (2023)
.Dongya Chu, Hui Wang, Honghong Wu, Bowu Liu, and Menjiya Tian, Divergent beam-based method for measuring the detuning angles of a laser frequency converter, Applied Optics Vol. 62, Issue 25, pp. 6787-6793 (2023)
.Dongbo Wu, Yang Zheng, Hui Wang, Hongru Lv, Jiawei Liang, Jie Yu, Formation mechanism of nano-crystal on the blade surface produced by low-plasticity ultrasonic rolling strengthening process, Journal of Manufacturing Processes, 2023, 90: 357-366
.Wang zesheng, wudongbo, Wanghui, liangjiawei, Geometric Modeling Analysis Method for Stacking Assembly Deviation of Aero-engine Rotor, Assembly Automation, 2022, 42(6): 809-816
.GengHaoqi, Wu Dongbo, Wang Hui. Experimental and simulation study of material removal behavior in ultra-precision turning of magnesium aluminate spinel (MgAl2O4) [J], Journal of Manufacturing Processes. 2022,8,36-50

total13 1/2

firstpreviousnext last Page

Home

Research Field

Open Course

Research Project

Paper

Honor and Reward

Student Information

Enrolment Information

Personal Information

Paper