专著/教材

1. 闫晓军，黄大伟，王占学，马洪忠. 无人机动力. 科学出版社, 2020. 【教育部高等学校航空航天类专业教学指导委员会推荐教材，普通高等教育“十三五”规划教材航空宇航科学与技术教材出版工程】

国际期刊论文（SCI检索，*通讯作者）

31. Xin Ding, Dawei Huang*, Zixu Guo, et al.  Damage Proportion Analysis of the Combined High and Low Cycle Fatigue Based on the Continuum Damage Mechanics.  Fatigue & Fracture of Engineering Materials & Structures, 2024.

https://doi.org/10.1111/ffe.14477

30. Xin Ding, Dawei Huang*, Zixu Guo, et al.  Fracture failure analysis of DZ125 directionally solidified superalloy under combined high and low cycle fatigue.  Engineering Fracture Mechanics, 2024.

https://doi.org/10.1016/j.engfracmech.2024.110459

29. Haohao Liu, Jinlun Yan, Dawei Huang*, et al.  A Relationship between Fracture Toughness Kc and Energy Release Rate Gc According to Fracture Morphology Analysis. Crystals, 2024.

https://doi.org/10.3390/cryst14080740

28. Han Yan, Xin Ding, Dawei Huang*, et al. Strain distribution of a fir-tree tenon/mortise structure under combined high and low cycle fatigue loads. Fatigue & Fracture of Engineering Materials & Structures, 2024.

https://doi.org/10.1111/ffe.14374

27. Zixu Guo, Ziyuan Song, Dawei Huang*, et al. A rapid multidisciplinary life optimization method for turbine blades with a large number of film cooling holes. Applied Thermal Engineering, 2024.

https://doi.org/10.1016/j.applthermaleng.2024.122824

26. Zixu Guo, Ziyuan Song, Dawei Huang, et al. A dislocation-based damage-coupled constitutive model for single crystal superalloy: Unveiling the effect of secondary orientation on creep life of circular hole. International Journal of Plasticity, 2024.

https://doi.org/10.1016/j.ijplas.2024.103874

25. Kaimin Guo, Hongzhuo Liu, Dawei Huang*, et al. Estimation of stress intensity factor for surface cracks in the firtree groove structure of turbine disk using pool-based active learning with Gaussian Process Regression. Journal of Theoretical and Applied Mechanics, 2024.

https://doi.org/10.15632/jtam-pl/174709

24. Kaimin Guo, Hongzhuo Liu, Dawei Huang*, et al. Markov chain-assisted stochastic model of crack growth rate. Journal of Applied Mathematics and Mechanics, 2023.

https://doi.org/10.1002/zamm.202300388

23. Zixu Guo, Ziyuan Song, Dawei Huang*, et al. Slip Band Evolution Behavior near Circular Hole on Single Crystal Superalloy: Experiment and Simulation. International Journal of Plasticity, 2023.

https://doi.org/10.1016/j.ijplas.2023.103600

22. Zixu Guo, Ziyuan Song, Dawei Huang*, et al. Matrix channel width evolution of single crystal superalloy under creep and thermal mechanical fatigue: experimental and modeling investigations. Metals and Materials International, 2022.

https://doi.org/10.1007/s12540-022-01195-8

21. Kaimin Guo, Han Yan, Dawei Huang*, et al. Active learning-based KNN-Monte Carlo simulation on the probabilistic fracture assessment of cracked structures. International Journal of Fatigue, 2022.

https://doi.org/10.1016/j.ijfatigue.2021.106533

20. Zixu Guo, Ziyuan Song, Dawei Huang, Xiaojun Yan. A high-temperature digital image correlation method and its application on strain measurement of film cooling holes. Journal of Multiscale Mdelling, 2021.

https://doi.org/10.1142/S1756973721500037

19. Zixu Guo, Ziyuan Song, Jun Fan, Xiaojun Yan, Dawei Huang*. Experimental and analytical investigation on service life of film cooling structure for single crystal turbine blade.  International Journal of Fatigue, 2021.

https://doi.org/10.1016/j.ijfatigue.2021.106318

18. Xin Ding, Dawei Huang*, Xiaojun Yan, et al. Effect of pneumatic shot peening on the high and low cycle combined fatigue life of K403 turbine blades.  Fatigue & Fracture of Engineering Materials & Structures, 2021.

https://doi.org/10.1111/ffe.13440

17. Zixu Guo, Dawei Huang*, Xiaojun Yan. Physics-based modeling of γ/γ´ microstructure evolution and creep constitutive relation for single crystal superalloy.  International Journal of Plasticity, 2021, 137: 102916.

https://doi.org/10.1016/j.ijplas.2020.102916

16. Zixu Guo, Dawei Huang*, Xiaojun Yan, et al. A damage coupled elastic-plastic constitutive model and its application on low cycle fatigue life prediction of turbine blade.  International Journal of Fatigue, 2020, 131: 105298.

15. Xiaoyu Qin, Xiaojun Yan, Dawei Huang, et al. Evolution behavior of M23C6 carbides under different hot deformation conditions in alloy 602 CA. Metals and Materials International, 2019, 25: 1616–1625.

14. Lei Han, Dawei Huang*, Xiaojun Yan, et al. Combined high and low cycle fatigue life prediction model based on damage mechanics and its application in determining the aluminized location of turbine blade.  International Journal of Fatigue, 2019, 127: 120-130.

13. Xiaojun Yan, Xiaoyu Qin, Dawei Huang*. High-Temperature combined fatigue tests on full-Scale turbine blades.  Journal of Multiscale Mdelling, 2019, 10(3): 1842003.

12. Lei Han, Dawei Huang*, Xiaojun Yan, et al. Effects of aluminizing and combined strengthening on the fatigue property of K403 superalloy component under combined high and low cycle loading.  International Journal of Fatigue, 2019, 125: 491-504.

11. Xiaoyu Qin, Dawei Huang*, Xiaojun Yan, et al. Hot deformation behaviors and optimization of processing parameters for alloy 602 CA.  Journal of Alloys and Compounds, 2019, 770: 507-516.

10. Dawei Huang, Xiaojun Yan, Xiaoyu Qin, et al. Scatter in fatigue crack growth behavior of a Ni-based superalloy at high temperature.  International Journal of Fatigue, 2019, 118: 1-7.

9. Peiyuan Li, Xiaojun Yan, Dawei Huang*, et al. A temperature-dependent model for predicting the fracture toughness of superalloys at elevated temperature.  Theoretical and Applied Fracture Mechanics, 2018, 93: 311-318.

8. Dawei Huang, Xiaojun Yan, Peiyuan Li, et al. Modeling of temperature influence on the fatigue crack growth behavior of superalloys.  International Journal of Fatigue, 2018, 110: 22-30.

7. Cao Chen, Xiaoyong Zhang, Xiaojun Yan, Jun Ren, Dawei Huang, et al. Effect of laser shock peening on combined low- and high-cycle fatigue life of casting and forging turbine blades. Journal of Iron & Steel Research International, 2018, 25(1): 108-119.

6. Jiaming Leng, Xiaojun Yan, Xiaoyong Zhang, Mingjing Qi, Zhiwei Liu, Dawei Huang. A novel bending fatigue test device based on self-excited vibration principle and its application to superelastic Nitinol microwire study. Smart Materials and Structures, 2017, 26: 105020.

5. Dawei Huang, Xiaojun Yan, Xiaoyong Zhang, et al. A SMA wire actuated extremely long-lifetime release actuator using two ball-lock mechanisms.  Review of Scientific Instruments, 2017, 88(5): 056107.

4. Xiaoyong Zhang, Xiaojun Yan, Dawei Huang, et al. Modeling functional fatigue of SMA using a more accurate subdivision of martensite volume fractions. Mechanics of Materials, 2016, 96: 12-29.

3. Jiaming Leng, Xiaojun Yan, Xiaoyong Zhang, Dawei Huang, et al. Design of a novel flexible shape memory alloy actuator with multilayer tubular structure for easy integration into a confined space. Smart Materials and Structures, 2016, 25(2): 025007.

2. Xiaojun Yan, Dawei Huang, Xiaoyong Zhang, et al. A one-stage, high-load capacity separation actuator using anti-friction rollers and redundant shape memory alloy wires.  Review of Scientific Instruments, 2015, 86(12): 125005.

1. Xiaojun Yan, Dawei Huang, Xiaoyong Zhang. Note: A novel curvature-driven shape memory alloy torsional actuator.  Review of Scientific Instruments, 2014, 85(12): 126109.

国际会议论文（*通讯作者）

4. Zixu Guo, Xiaoyu Qin, Dawei Huang, et al. Morphology evolution and probability characteristic of γ´ phase in single crystal superalloy during creep rafting.  18th International Conference on Fracture and Damage Mechanics. 2019, Rodos, Greece.

3. Xin Ding, Dawei Huang*, Xiaojun Yan. Low cycle fatigue behavior of superalloy GH4169 in high temperature gas environment.  18th International Conference on Fracture and Damage Mechanics. 2019, Rodos, Greece.

2. Xiaojun Yan, Xiaoyu Qin, Dawei Huang*. High temperature combined fatigue tests on full-scale turbine blades.  17th International Conference on Fracture and Damage Mechanics. 2018, Seville, Spain.

1. Xiaoyong Zhang, Dawei Huang, Mingjing Qi, Xiaojun Yan. Constitutive model for SMA considering arbitrary thermal-mechanical loading and loading history. 2017 IEEE 19th Electronics Packaging Technology Conference. 2017, Singapore.

专利/软著

34. 黄大伟, 何振宇, 闫晓军. 模拟轮盘旋转状态下应力应变的电磁加载试验方法和系统. 发明专利: CN202410720871.4.

33. 闫晓军, 黄大伟, 何振宇. 一种基于电磁加载的轮盘榫槽裂纹扩展试验系统及方法. 发明专利: CN202410720868.2.

32. 黄大伟, 闫晓军, 李林昕. 一种采用双层周向变刚度波箔片的动压空气径向轴承. 发明专利: CN202410632982.X.

31. 黄大伟, 闫含, 闫晓军, 丁鑫. 高低周复合疲劳载荷下榫联结构动态应变测试系统及方法. 发明专利: CN202410538431.7.

30. 闫晓军, 黄大伟, 刘浩浩. 一种利用氢脆原理的金属构件裂纹预制方法. 发明专利: CN202410521652.3.

29. 黄大伟, 刘浩浩, 闫晓军. 基于小试件和能量原理估算材料平面应变断裂韧性的方法. 发明专利: CN202410512936.6.

28. 闫晓军, 黄大伟, 等. 一种基于机器学习的表面处理粗糙度实时监测和控制方法. 发明专利: CN202311174210.8.

27. 闫晓军, 黄大伟, 等. 一种用于确定叶片激光强化区域及强化参数的方法. 发明专利: CN202311174229.2.

26. 闫晓军, 黄大伟, 等. 一种基于表面强化区域识别的叶片高低周寿命提升方法. 发明专利: CN202311174199.5.

25. 闫晓军, 黄大伟, 等. 基于表面粗糙度可视化定量评估的磁针研磨工艺优化方法. 发明专利: CN202311174203.8.

24. 黄大伟, 闫晓军, 刘宏卓, 等. 一种提供正交加载的小型高低周复合疲劳原位试验机. 发明专利：ZL202010958640.9.

23. 张小勇, 饶智祥, 闫晓军, 黄大伟, 等. 一种SMA－弹簧驱动的飞轮可重复锁紧机构. 发明专利：ZL201910988345.5.

22. 闫晓军, 张小勇, 漆明净, 黄大伟, 等. 一种中间供气微小型空气轴承系统. 发明专利：CN201911034367.4.

21. 张小勇, 闫晓军, 王翰林, 漆明净, 黄大伟.  一种采用SMA弹簧的快速复位非火工石蜡驱动器. 发明专利: CN201810629049.1.

20. 闫晓军, 竹阳升, 刘志伟, 漆明净, 张小勇, 黄大伟. 一种基于静电自激振动原理的梳齿结构驱动器. 发明专利：ZL201810280278.7.

19. 闫晓军, 丁鑫, 张小勇, 黄大伟, 等. 一种基于SMA丝的牙冠去除装置. 发明专利：ZL201811154192.6.

18. 张小勇, 闫晓军, 聂超, 黄大伟, 等. 一种超弹性SMA带捆绑式非火工解锁机构. 发明专利：CN201810130885.5.

17. 张小勇, 闫晓军, 黄大伟, 等. 一种SMA驱动的缺口螺栓连接与分离机构. 发明专利：ZL201810130891.0.

16. 黄大伟, 张小勇, 闫晓军, 等. 形状记忆合金智能驱动器寿命预测软件. 软件著作权：2018SR447863.

15. 闫晓军, 张小勇, 黄大伟, 等. 形状记忆合金智能驱动器设计软件. 软件著作权：2018SR472096.

14. 闫晓军, 张小勇, 黄大伟, 等. 一种SMA丝驱动的超大载荷解锁装置. 发明专利：CN201810132822.3.

13. 闫晓军, 秦晓宇, 黄大伟, 等. 一种考虑温度梯度的小型压电陶瓷驱动原位疲劳试验机. 发明专利：CN201810629064.6.

12. 闫晓军, 黄大伟, 秦晓宇, 等. Pro-Disk涡轮盘概率损伤容限设计与评估软件. 软件著作权：2017SR592559.

11. 闫晓军, 丁鑫, 张小勇, 黄大伟, 等. 一种基于弹簧振子的牙冠去除装置. 发明专利：ZL201810640196.9.

10. 张小勇, 闫晓军, 聂超, 黄大伟, 等. 一种SMA丝分瓣套筒大行程主动调节阻尼器. 发明专利：ZL201710230247.6.

9. 张小勇, 闫晓军, 陈铁刚, 黄大伟, 等. 一种电磁铁与SMA板耦合的可变主动调节多胞元阻尼器. 发明专利：ZL201711081844.3.

8. 闫晓军, 丁鑫, 黄大伟, 等. 一种高温燃气腐蚀疲劳试验系统. 发明专利：ZL201711111559.1.

7. 闫晓军, 丁鑫, 黄大伟, 等. 一种多试验件耐高温疲劳试验夹持装置. 发明专利：CN201711155535.6.

6. 黄大伟, 闫晓军, 秦晓宇, 等. 一种基于光敏树脂的复杂结构表面裂纹检测方法. 发明专利：CN201710578566.6.

5. 张小勇, 闫晓军, 黄大伟. 一种闸线式形状记忆合金驱动器. 发明专利：ZL201410758569.4.

4. 闫晓军, 黄大伟, 张小勇, 叶伟. 一种变螺旋形状记忆合金旋转电机. 发明专利：ZL201310722786.3.

3. 闫晓军, 杨巧龙, 张小勇, 刘颖, 黄大伟. 一种SMA分组滚棒型大载荷释放机构. 发明专利：ZL201310132157.5.

2. 张小勇, 闫晓军, 黄大伟. 一种熔断SMA丝空间连接与分离机构. 发明专利：ZL201210293404.5.

1. 张小勇, 闫晓军, 黄大伟. 一种获得SMA材料双程记忆效应的热处理方法. 发明专利：ZL201210293355.5.