杨辰，北京航空航天大学宇航学院副教授，于北京航空航天大学获工程力学学士学位、固体力学硕士学位、固体力学博士学位，曾先后在中国空间技术研究院（航天五院）钱学森空间技术实验室担任副研究员、高级工程师、硕士生导师，在北京理工大学担任副教授、博士生导师。

主要研究方向：力学中的反问题、传感器布置优化、航天器姿态/振动控制、可靠性优化设计、工程多目标优化设计。

中国科协第五批青年人才托举工程入选人，于2023年10月同时入选了由美国斯坦福大学和爱思唯尔数据库发布的全球前2%顶尖科学家榜单（World’s Top 2% Scientists）中的“whole career”和“single year”两个榜单。

发表学术论文50余篇，其中一作/通讯SCI论文40余篇（含7篇ESI高被引论文），以第一作者已出版专著一部，以第一发明人授权国家发明专利6项。

作为项目负责人，主持国家自然科学基金（面上、青年各1项）、北京市自然科学基金面上（2项）等十余个项目，参与十三五、十二五民用航天等二十余项课题。

担任《IEEE Sensors Journal》、《Journal of Vibration and Control》、《International Journal of Aeronautical and Space Sciences》3个SCI期刊的Associate Editor、首届全国设备结构健康监测标准化工作组委员、中国地质大学（武汉）兼职教授、兼职博导，持续担任50余个SCI期刊审稿人。

1篇SCI论文（Yang C,et al.Acta Astronautica,2017,137:382-402.）和1篇中文EI综述论文(杨辰.振动与冲击,2020,39(17): 82-93.)分别荣获“北京地区广受关注论文”和“首都前沿学术成果”，曾多次受邀在国际会议作大会报告，荣获JCR1区SCI期刊杰出审稿人（Outstanding Reviewer）、多次国际会议Best Paper Award。

个人学术主页：https://yangc7.gitee.io/yangc/，欢迎力学、控制、航空宇航、机械等方向同学加入！

SCI cited:

2024

[54]Shi Q, Lin B, Yang C*, et al. Convex model-based Regularization method for force reconstruction[J]. Computer Methods in Applied Mechanics and Engineering, 2024, 426: 116986.
[53]Shi Q, Qian S, Luo Z, Cao Z, Yang C*, et al. Uncertain Damage Identification Methods Based on Residual Force Vector under the Influence of Measurement Noise[J]. International Journal of Non-Linear Mechanics, 2024, Accepted.
[52]Fan Z(硕士生于研一下学期发表), Yang C*, et al. Convex set-oriented singular value decomposition with bounded uncertainties[J]. Journal of Computational and Applied Mathematics, 2024, Accepted.
[51]Yang C*, Fan Z(硕士生于研一下学期发表), Xia Y. Convex Model-based Reduced-order Model for Uncertain Control Systems[J]. IEEE Transactions on Systems Man Cybernetics-Systems, 2024, doi: 10.1109/TSMC.2024.3373031.
[50]Li J(大三学生), Wang H(大三学生), Yang C*. Adaptive Event-Triggered Quantized Attitude Control for QUAV with Appointed-Time Prescribed Performance Function[J]. Aerospace Science and Technology, 2024, 146: 108967.

2023

[49]Yang C*. Interval strategy-based regularization approach for force reconstruction with multi-source uncertainties[J]. Computer Methods in Applied Mechanics and Engineering, 2024, doi: 10.1016/j.cma.2023.116679.
[48]Yu Q, Dai G*, Yang C*, et al. Bi-level multi-objective optimization of the structure and attitude for space solar power station[J]. Advances in Space Research, 2023, doi: 10.1016/j.asr.2023.11.007.
[47]Lu W(硕士生于研二上学期发表), Yang C*, Xia Y. Uncertainty-oriented optimal impedance control for EPS-human system with reliability evaluation[J]. Control Engineering Practice, 2023, doi: 10.1016/j.conengprac.2023.105751.
[46]Yang C*, Xia Y. Interval Pareto front-based multi-objective robust optimization for sensor placement in structural modal identification[J]. Reliability Engineering & System Safety, 2024, doi: 10.1016/j.ress.2023.109703.
[45]Yang C*, Lu W(硕士生于研一下学期发表), Xia Y. Positioning accuracy analysis of industrial robots based on non-probabilistic time-dependent reliability[J]. IEEE Transactions on Reliability, 2023, doi: 10.1109/TR.2023.3292089.
[44]Yang C*, Shi Q. An interval perturbation method for singular value decomposition (SVD) with unknown-but-bounded (UBB) parameters[J]. Journal of Computational and Applied Mathematics, 2024, 436: 115436 doi: 10.1016/j.cam.2023.115436.
[43]Yang C*, Lu W(硕士生于研一下学期发表), Xia Y. Reliability-constrained optimal attitude-vibration control for rigid-flexible coupling satellite using interval dimension-wise analysis[J]. Reliability Engineering & System Safety, 2023, 237: 109382, doi: 10.1016/j.ress.2023.109382.
[42]Yang C*, Lu W(硕士生于研一下学期发表), Xia Y. Uncertain optimal attitude control for space power satellite based on interval Riccati equation with non-probabilistic time-dependent reliability[J]. Aerospace Science and Technology, 2023, 139: 108406, doi: 10.1016/j.ast.2023.108406.
[41]Yang C*, Xia Y. Interval Uncertainty-oriented Optimal Control Method for Spacecraft Attitude Control[J]. IEEE Transactions on Aerospace and Electronic Systems, 2023, doi: 10.1109/TAES.2023.3257777.
[40]Yang C, Yu Q*. Placement and size-oriented heat dissipation optimization for antenna module in space solar power satellite based on interval dimension-wise method[J]. Aerospace Science and Technology, 2023: 108155.

2022

[39]Yang C*, A novel non-probabilistic sensor placement method for structural health monitoring using an iterative multi-objective optimization algorithm[J]. IEEE Sensors Journal, 2022.
[38]Yu Q,Yang C*, Dai G*, et al. Synchronous Wireless Sensor and Sink Placement Method Using Dual-Population Coevolutionary Constrained Multi-Objective Optimization Algorithm[J]. IEEE Transactions on Industrial Informatics, 2022, DOI: 10.1109/TII.2022.3211853
[37]Yang C*, Xia Y. A novel two-step strategy of non-probabilistic multi-objective optimization for load-dependent sensor placement with interval uncertainties[J]. Mechanical Systems and Signal Processing, 2022, 176: 109173.
[36]Yang C*, Ouyang H. A novel load-dependent sensor placement method for model updating based on time-dependent reliability optimization considering multi-source uncertainties [J]. Mechanical Systems and Signal Processing, 2022, 165: 108386.
[35]Ma D, Chang S N*, Wu K,Yang C*. Experimental investigation on the characteristics of film thickness and temperature on the heated surface during spray cooling [J]. Sustainable Energy Technologies and Assessments, 2022, 51: 101871.
[34]Yang C*, Xia Y. A multi-objective optimization strategy of load-dependent sensor number determination and placement for on-orbit modal identification[J]. Measurement, 2022: 111682.
[33]Yang C*, Xia Y. Optimal Sensor Placement Based on Dynamic Condensation Using Multi-objective Optimization Algorithm. Structural and Multidisciplinary Optimization, 2022, DOI: 10.1007/s00158-022-03307-9.
[32]Wang S, Chang S*, Zhao H, Yang C*. Dynamic behaviors of water droplet moving on surfaces with different wettability driven by airflow[J]. International Journal of Multiphase Flow, 2022, 104127.

2021

[31]Yang C*. A novel uncertainty-oriented regularization method for load identification [J]. Mechanical Systems and Signal Processing, 2021, 157: 107774.
[30]Yang C*. An adaptive sensor placement algorithm for structural health monitoring based on multi-objective iterative optimization using weight factor updating [J]. Mechanical Systems and Signal Processing, 2021, 151: 107363.
[29]Yang C*, Hou X. Iterative two-layer thermal design strategy for step sandwich antenna of space solar power satellite using modified constrained multi-objective optimization [J]. Aerospace Science and Technology, 2021, 106987.
[28]Yang C*, Hou X B, Chang S N*. A synchronous placement and size-based multi-objective optimization method for heat dissipation design on antenna module of space solar power satellite [J]. Sustainable Energy Technologies and Assessments, 2021.
[27]Su Q, Chang S N*, Yang C*. Numerical investigation on transient and steady phase change heat transfer in the evaporator of a loop heat pipe [J]. International Journal of Heat and Mass Transfer, 2021, 179C: 121671.
[26]Su Q, Chang S N*, Yang C*. Loop heat pipe-based solar thermal façade water heating system: A review of performance evaluation and enhancement [J]. Solar Energy, 2021, 226: 319-347.
[25]Ma D, Chang S N*, Yang C*. Effects of surfaces and nozzles on hydrodynamic characteristics of water film during spray impingement [J]. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2021, 628: 127264.
[24]Wang L*, Liu J, Yang C, et al. A novel interval dynamic reliability computation approach for the risk evaluation of vibration active control systems based on PID controllers[J]. Applied Mathematical Modelling, 2021, 92: 422-446.

2020

[23]Yang C*, Liang K, Zhang X P. Strategy for sensor number determination and placement optimization with incomplete information based on interval possibility model and clustering avoidance distribution index. Computer Methods in Applied Mechanics and Engineering, 2020, 366: 113042.
[22]Yang C*, Ma R Z, Ma R. Optimal Sensor Placement for Modal Identification in Multirotary-Joint Solar Power Satellite [J]. IEEE Sensors Journal, 2020, 20(13): 7337-7346.
[21]Liang K*, Yang C, Sun Q. A smeared stiffener based reduced-order modelling method for buckling analysis of isogrid-stiffened cylinder[J]. Applied Mathematical Modelling, 2020, 77: 756-772.
[20]Ma R*, Lu X, Wang C, Yang C, Yao W. Numerical simulation of bubble motions in a coaxial annular electric field under microgravity[J]. Aerospace Science and Technology, 2020, 96: 105525.

2019

[19]Yang C*, Liang K, Zhang X P, Geng X Y. Sensor placement algorithm for structural health monitoring with redundancy elimination model based on sub-clustering strategy [J]. Mechanical Systems and Signal Processing, 2019, 124: 369-387.
[18]Yang C*, Zheng W Z, Zhang X P. Optimal sensor placement for spatial lattice structure based on three-dimensional redundancy elimination model [J]. Applied Mathematical Modelling, 2019, 66: 576-591.
[17]Yang C, Liang K*, Rong Y F, Sun Q. A hybrid reduced-order modeling technique for nonlinear structural dynamic simulation [J]. Aerospace Science and Technology, 2019, 84: 724-733.
[16]Yang C*, Zheng W Z, Zhang X P, Wang L, Hou X B. Static and dynamic evaluations for large square solar sail concept based on scalable prototype validation [J]. Acta Astronautica, 2019, 159: 258-266.

2018

[15]Yang C*. Sensor placement for structural health monitoring using hybrid optimization algorithm based on sensor distribution index and FE grids [J]. Structural Control and Health Monitoring, 2018, e2160.
[14]Yang C*, Lu Z X, Yang Z Y, Liang K. Parameter identification for structural dynamics based on interval analysis algorithm [J]. Acta Astronautica, 2018, 145: 131-140.
[13]Yang C*, Hou X B, Wang L. Uncertain surface accuracy evaluation based on non-probabilistic approach for large spacecraft [J]. Acta Astronautica, 2018, 151: 95-102.
[12]Yang C*, Lu Z X, Yang Z Y. Robust optimal sensor placement for uncertain structures with interval parameters [J]. IEEE Sensors Journal, 2018, 18(5): 2031-2041.
[11]Li X, Lu Z, Yang Z*, Yang C. Anisotropic in-plane mechanical behavior of square honeycombs under off-axis loading[J]. Materials & Design, 2018, 158: 88-97.

2017

[10]Yang C*, Hou X B, Wang L. Thermal design, analysis and comparison on three concepts of space solar power satellite [J]. Acta Astronautica, 2017, 137: 382-402.
[9]Yang C*, Zhang X P, Huang X Q, Cheng Z A, Zhang X H, Hou X B. Optimal sensor placement for deployable antenna module health monitoring in SSPS using genetic algorithm [J]. Acta Astronautica, 2017, 140: 213-224.
[8]Yang C*, Lu Z X. An interval effective independence method for optimal sensor placement based on non-probabilistic approach [J]. SCIENCE CHINA Technological Sciences, 2017, 60(2): 186-198.
[7]Li X, Lu Z, Yang Z*, Yang C. Directions dependence of the elastic properties of a 3D augmented re-entrant cellular structure[J]. Materials & Design, 2017, 134: 151-162.
[6]Zhang X*, Zhang S, Cheng Z, Duan B, Yang C et al. Structural-electromagnetic bidirectional coupling analysis of space large film reflector antennas[J]. Acta Astronautica, 2017, 139: 502-511.

2016

[5]Yang C*, Hou X B, Wang L, Zhang X H. Applications of different criteria in structural damage identification based on natural frequency and static displacement [J]. SCIENCE CHINA Technological Sciences, 2016, 59(11): 1746-1758.

2014

[4]Wang X*, Yang C, Wang L, Qiu Z. Probabilistic damage identification of structures with uncertainty based on dynamic responses[J]. Acta Mechanica Solida Sinica, 2014, 27(2): 172-180.
[3]Wang X*, Xia Y, Zhou X, Yang C. Structural damage measure index based on non-probabilistic reliability model[J]. Journal of Sound and Vibration, 2014, 333(5): 1344-1355.

2013

[2]Wang X*, Yang C, Wang L, Yang H, Qiu Z. Membership-set identification method for structural damage based on measured natural frequencies and static displacements[J]. Structural Health Monitoring, 2013, 12(1): 23-34.
[1]Wang X*, Yang C, Qiu Z. Non-probabilistic information fusion technique for structural damage identification based on measured dynamic data with uncertainty[J]. Acta Mechanica Sinica, 2013, 29(2): 202-210.