中文 English
  • Yunhua Li
  • Mechanical Engineering
  • Department of Mechatronic Engineering, School of Automation Science and Electrical Engineering
     

    Education Experience

    • 1991.81994.12

       Xi'an Jiaotong University   Mechatronic Engineering   Ph D 

    • 1985.81988.6

       Jilin University of Technology   Construction Machinery   Master 

    • 1978.101982.7

       North China University of Water Electric Power   Construction Machinery   Bachelor 

    Job Experience

    • 1999.9Now

       School of Automation, Beihang University   Professor, Supervisor of Ph D candiate 

    • 2008.72008.11

       School of Mechanical Engineering,Georgia Institute of Technology   Senior Research Fellow 

    • 1996.101999.8

       Division 303, Department of Automatic Control, Beihang University   Vice director, Associate Professor 

    • 2002.122005.10

       Practice Teaching Center, Beihang University   Director, Professor 

    • 1994.121996.10

       Division 303, Department of Automatic Control, Beihang University   Postdoctor 

    • 1997.71997.8

       IAA, National Chengkung University   Postdoctor 

    • 1982.71991.8

       Department of Mechanical Engineering, North China Institute of Water Conservancy and Water Electric Power   Assistant Professor and Lectuer 

    Team

    • 运动体机械机电液压控制

      主要进行运动体机械机电液压伺服控制、动力传动、能量管理、网络化综合控管等方面科学研究和人才培养。团队成员:杨丽曼副教授,和在读博士生、硕士生及博士后。

    Social Appointments

    • 2020.1-2021.12 Senior Editor of IEEE/ASME Transactions on Mechatronics

    • 2010.1-2014.12 Technical editor of IEEE/ASME Transactions on Mechatronics

    • 2011.11-. 道路施工技术与装备教育部重点实验室(长安大学)学术委员会委员

    • 2014.11-. 中国工程机械学会(国家一级学会)理事,兼任特大型工程运输车辆分会副主任委员

    • 2007.6-2019.4 Vice director of Hydraulic Branch Committee of CMES

    • 2013.6-. Technical editor of Machine Tool and Hydraulics

    • 2012.4-2014.3 Honoary Professor of National Taipei University of Technology

    • 2010.1-. 华北水利水电大学兼职教授

    • 2012.6-. 郑州新大方国家认定企业技术中心副主任

     

    Introduction

       李运华,河北省邢台县人,博导,长聘教授。1982年毕业于华北水利水电学院水利水电工程机械专业,获学士学位。1988年吉林工业大学工程机械专业研究生毕业,获硕士学位。1994毕业于西安交通大学流体传动与控制专业,获工学博士学位。1994年至1997年在北京航空航天大学和台湾成功大学做博士后。1997年评聘为副教授。1999年破格评聘为教授,2000年5月遴选为博导。2008年8月至11月作为国家留学基金委公派高级研究学者在美国Georgia Institute of Technology进行学术交流访问。
       主持包括国家自然科学基金重点与面上项目、863和973分课题等项目30余项,公开发表学术论文280余篇,其中在IEEE Transactions和ASME Journal等在内的SCI期刊发表论文60余篇,出版著作4部,获国家发明专利授权10余项。获省部级科技进步一等奖3项,二等奖4项,三等奖2项,北京市高等教育教学成果一等奖2项。
       主要代表作论文为:
    1. Yunhua Li, et al. Yang. Network-Based Coordinated Motion Control of Large-Scale Transportation Vehicles. IEEE/ASME Trans. Mechatronics, 2007, 12(2): 208-215, SCI
    2. Li Yunhua. Development of Hybrid Control of Electro-hydraulic Torque Load Simulator. ASME Trans. J. Dyn. Syst., Meas., Cntrl, 2002, 124(3): 415-419, SCI
    3. Shengtao Fan, Yunhua Li, Xiaqing Li, and Luyan Bi. A Method for the Calculation of Frequency-Dependent Transmission Line Transformation Matrices. IEEE Trans on Power Systems(Impact Factor:1.875), 2009, 24(2): 552-560, SCI/EI Indexed
    4. Yunhua Li, Hao Lu, Shengli Tian, et al. Posture Control of Electromechanical Actuator-Based Thrust Vector System for Aircraft Engine. IEEE Transactions on Industrial Electronics, 2012, vol.59,no.9,pp3561-3571,SCI Q1,IF5.16
    5. Yunhua Li, Chaozhi Cai, and Kok-Meng Lee. A Novel Cascade Temperature Control System for a High-Speed Heat-Airflow Wind Tunnel, IEEE/ASME Transactions on Mechatronics, 2013, 18(4):1310-1319, SCI Q1, IF 3.13

    • Entry Time:
    • Graduated University:Xi'an Jiaotong University
    • Honor& Award:Since 1998,3 Prince and Ministry Scince and Technology First Grade Awards, 4 Prince and Ministry Scince and Technology Second Grade Awards, and 2 Prince and Ministry Scince and Technology Second Grade Awards. In 2004, Baosteel Excellent Teacher.
    • Office Location:
    • Contact:010-82339038
    • email:
    • Personal website:
    Copyright © 2018 Beihang University. All rights reserved.

    Address: No. 37 Xueyuan Road, Haidian District, Beijing, P.R. China,
    PV: