Personal Information

Professor
Supervisor of Doctorate Candidates
Supervisor of Master's Candidates

Main positions:飞行器制造工程系系主任

Paper

.F. Lyu, Y. Li*, Z. Shi* et al. Stress and temperature dependence of stress relaxation ageing behaviour of an Al–Zn–Mg alloy. Mater Sci Eng A, 773(2020): 138859.
.Y. Li, Z. Shi and J. Lin. Experiments and modelling of yield strength and work hardening behaviour of Al-Cu-Li alloy during artificial ageing. Materials Design, 183 (2019): 108121.,2020
.Y. Li, Z. Shi, Q. Rong, W. Zhou and J. Lin. Effect of pin arrangement on formed shape with sparse multi-point flexible tool for creep age forming. International Journal of Machine Tools and Manufacture, 140 (2019): 48-61. ,2020
.W. Zhou, Y. Li, Z. Shi et al. Analytical solutions for elastic buckling analysis of stiffened panels subjected to pure bending. Int J Mech Sci, 161(2019): 105024.
.Q. Rong, Y. Li, Z. Shi et al. Experimental investigations of stress-relaxation ageing behaviour of AA6082. Mat Sci Eng A, 750(2019): 108-116.
.F. Lyu, Y. Li*, X. Huang et al. An investigation of creep age forming of AA7B04 stiffened plates: Experiments and FE modelling. J Manuf Process, 37 (2019): 232-241.
.Y. Li, Z. Shao, Q. Rong et al. Development of similarity-based scaling criterial for creep age forming of large/extra-large panels. Int J Adv Manuf Technol, 101(2019): 1537-1551.
.Y. Li, Q. Rong, Z. Shi, et al. An accelerated springback compensation method for creep age forming. Int J Adv Manuf Technol, 102(2019): 121-134.
.Y. Li, Y. L. Yang, Q. Rong et al. Effect of initial tempers on mechanical properties of creep-aged AA2050. Manuf Review, 6 (2019): 8.
.Y. Li, Z. Shi, J. Lin, Y. L. Yang, P. Saillard and R. Said. Effect of machining-induced residual stress on springback of creep age formed AA2050 plates with asymmetric creep-ageing behaviour. International Journal of Machine Tools and Manufacture, 132 (2018): 113-122. ,2020
.Y. Li, Z. Shi, J. Lin et al. FE simulation of asymmetric creep-ageing behaviour of AA2050 and its application to creep age forming. Int J Mech Sci, 140 (2018): 228-240.
.Y. Li, Z. Shi, J. Lin, Y. L. Yang and Q. Rong. Extended application of a unified creep-ageing constitutive model to multistep heat treatment of aluminium alloys. Materials Design, 122 (2017): 422-432. ,2020

total21 1/2

firstpreviousnext last Page

Home

Research Field

Open Course

Research Project

Paper

Honor and Reward

Student Information

Enrolment Information

Personal Information

Paper