发表刊物：Materials & Design
关键字：The static recrystallization (SRX) of the designed high γ′-fraction Ni-based single crystal superalloy (SX) AlloyX was investigated. The three-dimensional SRX threshold of AlloyX involves plastic strain – deformation temperature – heat treatment temperature established by isothermal deformation and heat treatment tests. The influence of different dislocation configurations obtained at different deformation temperatures on critical SRX temperature was analyzed. The high-density entangled dislocations were observed to gradually transition into low-angle grain boundaries at heat treatment temperature within the γ-channel, potentially serving as the primary driving force for the SRX of AlloyX. Compared with the lower γ′-fraction SX DD32, it is further determined that the preferential dissolution of the small-sized γ′ in the interdendritic region (IDR) caused by high Al is the important factor that induces the recrystallization to occur preferentially in the IDR of AlloyX rather than the dendrite region (DR).
论文类型：期刊论文
通讯作者：赵海根
是否译文：否
发表时间：2024-08-01
收录刊物：SCI