.Control of pellets coating in a wurster type fluidized bed based on electrical capacitance tomography measurement:Transaction of Institute of Measurement and Control,42:729-742 .Mass flow rate measurment of bulk solids based on microwave tomography and microwave doppler methods:Powder Technology,360:112-119 .Investigation the complex gas-solids flow characteristics in a fluidized bed with wurster tube by process tomography and CFD simulation:Powder Technology,357:117-133 .Mixing/segregation characteristics and bubble behaviors of density-segregated binary particles in a pressurized fluidized bed:Powder Technology,434 .CFD-DEM investigation for the gas-solid flow characteristics in a fluidized bed dryer:Chemical Engineering Research and Design,196:235-253 .Impact of pressure on gas-solid hydrodynamics of Geldart B and D particles in a pressurized bubbling fluidized bed: A CFD-DEM study:Particuology,96:328-340 .On-line Monitoring of Flow Process in Spout-Fluid Bed by Combining Electrical Tomography and High-speed CCD Camera:Chemical Engineering Science,267 .Investigation of gas-solids flow in a circulating fluidized bed using 3D electrical capacitance tomography:Measurement Science and Technology,27 .Study of bubbling and slugging fluidised beds by simulation and electrical capacitance tomography:AIChE J.,52:3078-3087 .Numerical study of bubble flow using second-order moment turbulence model and population balance method:Numerical Heat Transfer,68:1220-1241